Gryke Scientific Instruments Trading

 

 

 

 

TQC-Sheen (Adhesion)

 

 

 

 

Adhesion is the tendency of dissimilar particles and/or surfaces to cling to one another. The adhesive strength of paint and coatings are of crucial importance to enable the material to meet the basic functions of protection and decoration. Adhesion testing in the paint and coating industries is necessary to ensure the paint or coating will adhere properly.


Cross Cut Adhesion Test Kit CC1000

TQC-Sheen Cross Cut Adhesion Test Kit CC1000
The ideal tool for the frequent user and for testing on hard substrates such as metal.
Standards: ASTM D3359, ISO 2409, ГОСТ 15140

The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Knives and tape can be ordered as a spare as well


back

 

 

Cross Cut Adhesion Test KIT CC2000

TQC-Sheen Cross Cut Adhesion Test KIT CC2000
Frequently used and standardized instrument to test the adhesion of dry coatings on their substrate.
Standards: ASTM D3359, ISO 2409, ГОСТ 15140

The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The cutting knife of the TQC Cross Cut Adhesion Test CC2000 is easy to exchange without the use of extra tools. The self positioning knife bracket of the TQC Cross Cut Adhesion Test CC2000 ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC2000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. ISO 2409.
Knives and tape can be ordered as a spare as well

top |back

 

 

Cross Cut Adhesion Test KIT CC3000

TQC-Sheen Cross Cut Adhesion Test KIT CC3000
Through its extensive adjustment possibilities, this version is ideal if the test is performed by constantly changing persons.
Standards: ASTM D3359, ISO 2409, ГОСТ 15140

The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
Fully adjustable
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.

Features:


Knives and tape can be ordered as a spare as well

top |back

 

 

Adhesion Test Kit (HPK)

TQC-Sheen Adhesion Test Kit (HPK)

The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.

top |back

 

 

Cross Cut Adhesion Test Basic Cutter

TQC-Sheen Cross Cut Adhesion Test Basic Cutter
Basic knife for cross cut adhesion tests.
Standards: ASTM D3359, ISO 2409, ГОСТ 15140

The TQC Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The cutting knife of the TQC Cross Cut Adhesion Test Basic Cutter is easy to exchange without the use of extra tools. The self positioning knife bracket of the TQC Cross Cut Adhesion Test Basic Cutter ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test Basic Cutter contains a grip with cutter.

top |back

 

 

Cross Cut Adhesion Test Knives

TQC-Sheen Cross Cut Adhesion Test Knives
Standards: ASTM D3359, ISO 2409, ГОСТ 15140

TQC delivers a wide range of Cross Cut Adhesion knife sizes, available for different coating thicknesses and substrates and according to different standards.
Hardness: HRC 58 +/- 2

top |back

 

 

Tapes For Adhesion-, Dust-, Roughness- And Temperature Tests

TQC-Sheen Tapes For Adhesion-, Dust-, Roughness- And Temperature Tests
Standards: ISO 2409, ГОСТ 15140

These different TQC tapes are suitable for carrying out various tests such as the adhesion-cross cut test, the dust test, the surface roughness test with the so-called Testex films, coarse or X-coarse and tapes for CurveX temperature tests.
The various tapes are specified according to standards in the item description. Tape material varies by application of the test.
The tape according to EN ISO 2409:2003, Polyester are individually or in sets of 3 to order.
The tape according to EN ISO 2409:1999, Glass-reinforced can be ordered on a roll of 10 meters or a roll of 50 meters.
The dust test tape to BS EN ISO 8502-3, Polyester which is supplied in the TQC SP3200 kit is ordered separately.
For rough surface testing the ASTM D4541 – 09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers, Testex tapes can be ordered in types x-coarse and coarse.
Tape for the open-wire temperature sensors used in the TQC Curvex temperature data logger system, “Reel glass tape” CX2200 is a roll of tape 19mm width, length 33 meters and is suitable for temperatures up to about 265°C

top |back

 

 

Dolly Drill For Adhesion Test

TQC-Sheen Dolly Drill For Adhesion Test
The ideal tool to remove excess glue.
Standards: ASTM D4541

The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.

top |back

 

 

Adhesion Tester PosiTest ATM and ATA

TQC-Sheen Adhesion Tester PosiTest ATM and ATA
The new PosiTest Adhesion Tester measures adhesion of coatings applied on metal, wood, concrete and similar substrates. There is a manual and an automatic model available.
Standards: AS / NZS 1580.408.5, ASTM D4541, ASTM D7234, ISO 16276-1, ISO 4624, ГОСТ 27890

The new PosiTest Adhesion Tester conforms to international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others. Both models have a hydraulic pump. The pump of the automatic version is electronically controlled and applies smooth and continuous pull-off pressure. This greatly reduces user effort and the risk of influencing the pulling process.
Self-aligning aluminum dollies enable accurate measurements on smooth or uneven surfaces
The internal memory of the Manual version stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls. The automatic version stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, nature of fracture and user notes for 100,000 pulls in up to 1,000 batches in its internal memory and pull rate, pull limit and hold time are user-adjustable with the impact and scratch resistant color touch screen with keypad for operation with or without gloves.
Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cel. Evaluating measured values on PC is possible by using an adapter and PC-software.

top |back

 

 

Basic Inspection KIT

TQC-Sheen Basic Inspection KIT
Assess the quality of old and existing layers of paint.
Standards: ASTM B117

To fulfill the demand of many companies in the line of paint and their customers we composed the “Basic Inspection Kit”. In the field the need had arisen of one standard measuring set to perform all measurements and tests regarding painting.
The kit is created to be used by executives of painting companies, such as foremen and divisional heads. The measuring set is also a very useful tool for customers like housing associations.
The “Basic Inspection Kit” gives you profound information on the quality of old or existing coats of paint. The kit is also equipped with tools to perform measurements during application and delivery of a new paint job.
The “Basic Inspection Kit” consists of the following tools:

 TQC Basic Inspection Kit

 SP5000

 SP5005

 RV2100 Digital thermo/hygrometer

 SP3000 MasterPaintPlate

 SP3007 TQC Tape For Adhesion Test (ISO 2409:2003)

 SP3008 Rubber grip knife 9mm

 DI0035 LED pocket flashlight

 DI0011 Compass

 LD6205 Illuminated hand-held surface microscope for surface inspections.

 SP6202 Bradle

 SP2000 PH-indicator paper

 SP6000 Wedge for measing reverse-side tolerance

 LD3025 Telescopic Inspection Mirror

 SP6400 Permanent marker black

 LI7000 Non-destructive instrument for measuring moisture levels in wood

 LI0004 Destructive wood moisture meter


Tape can be ordered separately as well.

top |back

 

 

Adhesion Test Pat Handy

TQC-Sheen Adhesion Test Pat Handy
Standards: ASTM D4541, EN 24624, ISO 4624, ГОСТ 27890
The TQC Adhesion Test Pat Handy is an easy to use, lightweight hydraulic adhesion tester that applies an increasing level of pull off force to a dolly adhered to the surface under test simply by turning the handle. The adhesion test head has self adjusting legs, which ensure that the pull off force is always applied 90º to the coating even on uneven substrate surfaces. The self adjusting feature results in extremely accurate and reproducible adhesion test results. The TQC Adhesion Test Pat Handy weighs only 1250 gram and comes complete with an A4-size carrying 80 mm height case.

top |back

 

 

Pull Off Adhesion Tester Model Pat GM01 GM04

TQC-Sheen Pull Off Adhesion Tester Model Pat GM01 GM04
Standards: ASTM D4541, ISO 4624, ГОСТ 27890

This Precision Pull Off Adhesion Tester is a hydraulic tensile tester that works on the so-called pull off principle, and complies with the requirements of ISO 4624. The system consists of a hydraulic hand-pump equipped with a precision manometer and the actual adhesion pull off testing head.
The coating testing-head is equipped with four cylinders that work according to the ‘Dynamic Force Distribution’ principle, whereby the force is brought to bear fully pulling off.
Different types of testing heads are available: a micro testing-head for measuring on very small coated objects, the standard testing-head for measuring of paint adhesion on on steel, and the large testing-head for measuring the coating adhesion on concrete and other stone surfaces with 50 mm diameter test-dollies. Adhesion test dollies come in a variety of dimensions and shapes (also for curved surfaces). A PC-adapter and related software is available for processing the measurement results by computer.

top |back

 

 

Cross Cut Adhesion Test KIT (Master Paint Plate)

TQC-Sheen Cross Cut Adhesion Test KIT (Master Paint Plate)
Versatile measuring tool with common tests for paints and coatings.
Standards: ISO 2409, ГОСТ 15140

The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additonal tools
• Wet film thickness gauge ranging from 50 microns up to 160 microns.
• On the corners there is an edge grind checker for correct roundness of edges.
• At the bottom is a wet film applicator ranging from 0 to 180 µm.
• The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.
Standards
NEN-EN-ISO-2409, ASTM D3359

top |back

 

 

https://www.tqcsheen.com/en/