Gryke Scientific Instruments Trading

 

 

 

 

TQC-Sheen (Drying Time)

 

 

 

 

The drying time of paint depends on the various stages during curing. During the drying process of films various stages are easy to detect but difficult to define in terms of chemical and physical principles. To evaluate these stages objectively it is necessary to use instrumentation under controlled conditions. Drying time recorders in general are available as a single needle.

 

 

Drying Time Recorder

TQC-Sheen Drying Time Recorder

The new TQC Drying Time Recorder is a fully digitally controlled machine that operates conform the BK (Beck Koller) method
Standards: ASTM D5895, DIN EN 14022, ISO 9117-4
The Drying Time Recorder is a fully digitally controlled machine to define the different stages in the drying process of paints and coatings. The Drying Time Recorder operates conform the BK (Beck Koller) method. Defining the final result or checking intermediate stages is very easy by means of the clear digital display and the intuitive interface. The compact machine meets ASTM D5895, ISO 9117-4 and DIN EN 14022. The Drying Time Recorder has six tracks, and comes with two robust and reusable glass beds of 100 X 350 X 3 mm. Optional are six narrow glass beds in special adapters.
The front panel of the Drying Time Recorder is made out of clear glass, which is easy to clean and protects the display underneath it. The Drying Time Recorder is powered by a safe 24 V DC power supply.

Temperature-friendly Design
The possibility to perform tests at temperatures as low as -20 °C is unique. The drive system is lubricant free, so there is no risk of lubricants that thicken at lower temperatures. The display is heated which enhances menu visibility at lower emperatures. These design features result in a wide operating temperature range from -20°C to +70°C (non-condensing), which makes it possible to perform tests in climate chambers.
Broad and flexible time range
A broad and flexible time range can be set varying from 1 minute up to 200 hours. This makes the Drying Time Recorder suitable for fast drying waterborne coatings as well as very slow drying paints that may need days to dry. Time settings are very accurate, < 1 % of set time.

back

 

 

 

Drying Time Recorder Option

TQC-Sheen Drying Time Recorder Option

Drying Time Recorder tool to be used as an optional test tool for the TQC Automatic Film Applicators. This device allows the user to accurately define the drying time of various types of coatings within the time range of 1 minute to 48 hours.
A drying time recorder with many advanced features such as:
• Digital indication of the drying stages;
• from hand dry to dry in 10 seconds accurately displayed
• “Intelligent recording”, which significantly improves the resolution of a longer drying process.
The drying time recorder option can be easily clamped on any standard TQC Automatic film applicator with firmware 2.01 and above.

top |back

 

 

https://www.tqcsheen.com/en/